Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Edison Homeowners
A broken garage door spring is the failure that stops everything. The door won’t lift, the opener just hums, and your car is stuck inside. Garage door spring repair in Edison typically costs $180 – $340 for a single spring, and most jobs are done the same day you call. Our technicians have up to 9 years of experience, and spring work is one of the repairs we handle most. We answer 24/7 at (855) 658-5248. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Garage Door Spring Repair Service Includes
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the bar above your door, and it does the heavy lifting by twisting as the door closes and unwinding as it opens. When it snaps, the door becomes dead weight and usually won’t budge. We replace the spring with a correctly sized match for your door’s weight and height, because an undersized spring will fail early. If your garage holds a heavier insulated door, as many in Edison’s postwar split-levels and newer builds do, the spring has to be matched to that load, not guessed.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. Older homes around Edison and Metuchen commonly still have them, and they’re the first thing we check when a door suddenly slams down or won’t stay up. We replace them in matched pairs and add safety containment so a broken spring can’t whip loose. These springs are under serious tension even at rest, and the repair belongs to a trained technician, not a weekend project.

Broken Spring Repair
If you heard a loud bang from the garage and the door stopped working, a spring broke. We confirm it’s the spring and not the opener, cables, or track before we quote anything, because those failures look similar from the outside. Then we swap in the right replacement and rebalance the door so the opener isn’t straining against a heavy load. The door should feel light and stay put halfway up when we’re done.

Spring Adjustment
Sometimes the spring isn’t broken, just out of balance. A door that drifts down on its own or feels heavy to lift by hand needs its spring tension adjusted. We measure the door’s balance and set the springs so the opener lifts a properly weighted door. This is precise work: a few turns too far either way puts extra load on the opener and cables. We take the adjustment seriously because the margin is narrow.
Safety Cable Installation
Safety cables run through the center of extension springs and keep the spring contained if it breaks. Many older Edison garages never had them, or the cables have rusted through. We install them on any extension spring setup that’s missing them, and we check existing cables for wear while we’re in there. It’s a small part that prevents a serious hazard.
Spring Inspection
A spring inspection catches the wear that leads to a break before it happens. We look at the coil spacing, rust, and stress cracks, and check that the springs, cables, and rollers are working as a set. If a spring is close to the end of its life, we tell you plainly and let you decide. That’s the point of an inspection: an honest read on what’s wearing out, not a list of things to sell.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We’re factory-familiar with 8 of the most common garage door and opener brands, which matters more than it sounds. A Wayne Dalton door often carries a spring system sized differently from a comparable Clopay, and knowing how each one is built lets us source the correct spring the first time. We also work on Amarr and Raynor doors, among others, and we know the weight ranges and hardware those systems use. That means fewer return trips and a door that’s balanced the way it was designed to be.
We work on the brand already in your garage. Whether you have a Wayne Dalton, Amarr, or any other make, we can help. We service LiftMaster, Chamberlain, Genie, Clopay, Wayne Dalton, Craftsman, Amarr, and Raynor equipment across every stage of ownership, from a single broken spring to a full replacement. You don’t need to hunt down the original installer to get the right part.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. When a torsion spring snaps, it makes a sharp report you’ll hear through the house. The door usually won’t open after that, and that sound is your cue to stop using the opener.
- The door won’t lift, or only rises a few inches. If the opener runs but the door barely moves, the spring has likely failed and the motor is trying to lift dead weight. Running it this way wears the opener out fast.
- A visible gap in the spring coil. Look at the spring above the door and count the coils. A clean break leaves a gap where the coil should be continuous, and a cracked spring is one close to failing.
- The door slams down or won’t stay up. A door that drops without help or won’t stay halfway open has lost spring tension. That’s a balance problem, and it’s also a safety problem if someone is under it.
- The opener strains or the door feels heavy to lift by hand. If you can barely raise the door manually, the springs are doing too little of the work. The opener takes the load instead, and it wasn’t built for that.
Our Garage Door Spring Repair Process – Step by Step
We keep the job predictable, because a broken spring is already enough of a disruption to your day.
- 1
We ask what happened when you call. Hearing the details, like a bang, a stuck door, or a door drifting down, helps us bring the right springs and tools. It also means we can often tell you roughly what to expect before anyone arrives.
- 2
We diagnose the actual failure. A lot of “spring problems” turn out to be a frayed cable or a bent track. We check the springs, cables, rollers, and opener together so we fix the real cause, not just the symptom.
- 3
We give you a written estimate before any work starts. The price is quoted and agreed before we touch a thing. The written estimate sets the final price, so there’s no invoice surprise when we’re done.
- 4
We replace the spring and test the balance. We match the new spring to the door’s weight, wind it to the correct tension, and check that the door holds position halfway up. A balanced door is the sign of a correct spring job.
- 5
We check the whole system before we leave. Cables, safety containment, rollers, and opener performance get one final look. Then we walk you through what we did and how the door should feel. Back up and running today.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Edison?
A typical spring repair in Edison runs $180 – $340 for a single spring, depending on the spring type, the door’s weight, and whether the job is a straightforward swap or includes cables and hardware. A matched pair is usually replaced together, so a pair runs about twice that range. Here’s how the common scenarios break down.
| Service | Typical estimated range |
|---|---|
| Torsion or extension spring repair (one spring) | $180 – $340 |
| Matched pair of springs (replaced together) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Garage door repair (general) | $150 – $600 |
What moves the number: the door’s size and weight, the type of spring, and whether the cables or drums need attention too. How to avoid overpaying: ask for the price before work starts, and make sure the quote covers rebalancing the door, not just the spring part. A free estimate from us includes a full diagnostic, a written price, and a clear explanation of what’s being replaced. Call (855) 658-5248 for an exact quote, estimates are free.
Garage Door Spring Repair Near Edison – Our Service Area
We cover Edison and the towns around it, including Metuchen, Fords, Menlo Park Terrace, Highland Park, South Amboy, Sayreville, Hopelawn, South River, Perth Amboy, Keasbey, and Manalapan. Most of these are a short drive from Edison, so a broken spring is usually a same-day job. If you’re in Keasbey or Fords, we can often work you in quickly. Same for our garage door spring repair coverage out toward Manalapan.
Serving Edison, NJ – Our Local Coverage Area
We serve Edison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Edison
Garage door spring repair is the replacement or adjustment of the springs that counterbalance your door’s weight. Torsion springs sit on a bar above the door; extension springs run along the side tracks. Without working springs, the opener can’t lift the door. We handle both types and match the new spring to your specific door.
Most spring repairs take about an hour to an hour and a half once we’re on site. The exact time depends on the door type and whether cables or hardware need attention too. We don’t rush the winding and balancing, because that’s where the job is done right or done wrong. You’ll get a realistic window when you call, not a guess.
A single spring typically runs $180 – $340, and a matched pair is usually replaced together at about twice that. The written estimate sets the final price, so you know the number before work starts. Call (855) 658-5248 for an exact quote, estimates are free.
Yes. We service Wayne Dalton, Amarr, Clopay, Raynor, and many other makes, along with LiftMaster, Chamberlain, Genie, and Craftsman openers. Knowing how each brand’s springs and hardware are built helps us get the right part the first visit. If you’re not sure of your brand, we can identify it on site.
Yes, same-day spring repair is often available. We answer 24/7 at (855) 658-5248, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind our work and guarantee your satisfaction with the repair. Ask about the specific coverage on your job when you get your written estimate so it’s clear up front. We’ll explain exactly what’s covered before any work begins.
Clear the area under and around the door so the technician has room to work, and release the opener if the door is stuck so nobody tries to run it. Don’t attempt to lift or prop the door yourself, since a door with a broken spring can come down hard. Keep children and pets away from the garage while we’re working, and we’ll handle the rest.
Schedule Your Garage Door Spring Repair Service in Edison Today
One broken spring can keep your car trapped and your home less secure. Call (855) 658-5248 for a free, no-obligation estimate on garage door spring repair, and we’ll get the right part, the right fix, the first visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We also cover garage door spring repair nearby, and you can learn more about Edison Garage Door Repair Co to see the full range of work we do.
Written by the team at Edison Garage Door Repair Co.